Nothing beats the convenience and superior quality of a professionally applied factory finish. Let Horner Millwork save you a step by having your Masonite Fiberglass Doors prefinished by us before they reach the job site. Our Fortress Coating System saves times, includes a limited 5 year warranty, and offers consistent quality.

prefinishing_4

Paint Finishes

Imagine a door that is ready to install!

PAINT PROCESS:
STANDARD COLORS:

Variations in screens may cause finish colors shown to vary from actual finish. Please ask your Horner Sales Rep for a sample. Custom Sherwin Williams colors available, SW# and name required.

Stain Finishes

THE LAYERS OF QUALITY:

Masonite Belleville
Oak Textured

Base Coat

Graining Enhancement

UV Clear Coat

STAINING PROCESS:
STAINS SHOWN ON MAHOGANY:

Prep The Unit
Base Coat
Curing
Grain Enhancement
Curing
2 Uv Top Coats
Curing
Protect & Ship

FC100 LIGHT OAK
FC400 ENGLISH WALNUT
FC700 MAHOGANY
FC200 NATURAL OAK
FC500 WALNUT
FC800-Mahogany-Driftwood
FC800 DRIFTWOOD
FC300 CEDAR
FC600 CHERRY
FC900 SLATE GREY

STAINS SHOWN ON OAK:
FC100 LIGHT OAK
FC400 ENGLISH WALNUT
FC700 MAHOGANY
FC200 NATURAL OAK
FC500 WALNUT
FC800 DRIFTWOOD
FC300 CEDAR
FC600 CHERRY
FC900 SLATE GREY

STAINS SHOWN ON FIR:
FC100 LIGHT OAK
FC400 ENGLISH WALNUT
FC700 MAHOGANY
FC200 NATURAL OAK
FC500 WALNUT
FC800 DRIFTWOOD
FC300 CEDAR
FC600 CHERRY
FC900 SLATE GREY

Variations in screens may cause finish colors shown to vary from actual finish. Please ask your Horner Sales Rep for a sample. 

CARE & WARRANTY

Fortress Coatings Systems™ Residential Warranty
With a little care your door finish will last many years with little maintenance.

With each finish there is a touch up bottle with paint. Please store in cool, dry place, out of direct sunlight.

For our Fortress Stain process you will receive two touch up bottles, a base coat color and a grain enhancement color (this hand applied finish will be unique to each door due to the nature of the fiberglass graining and hand application of the finish).

Fortress Coatings Systems™ painted and stained doors utilize a Sherwin Williams industrial paint with UV inhibitors to retain the color of your prefinished door.

Finish will be warranted for a period of 5 years from date of purchase for paint adhesion and color retention.

Fortress stained doors are top coated with a UV water based clear coat. Proper maintenance would be to apply topcoat depending on weather exposure once every other year.

Prefinished door jambs should be inspected and touched up as needed, frame joints should be inspected and caulking maintained at the sill and jamb joints. Prefinishing of primed finger joint jambs will show visible joints and is not considered a defect.

Do not use any harsh chemicals on your door when cleaning; a simple solution of very mild soap and water should be used if needed.

With these few easy steps your finish will last many years.

Products manufacturers’ warranty covers any defective material.

prefinish_a2